An original string, consisting of lowercase English letters, can be encoded by the following steps:
For example, one way to encode an original string "abcdefghijklmnop" might be:
["ab", "cdefghijklmn", "o", "p"].["ab", "12", "1", "p"]."ab121p".Given two encoded strings s1 and s2, consisting of lowercase English letters and digits 1-9 (inclusive), return true if there exists an original string that could be encoded as both s1 and s2. Otherwise, return false.
Note: The test cases are generated such that the number of consecutive digits in s1 and s2 does not exceed 3.
Example 1:
Input: s1 = "internationalization", s2 = "i18n" Output: true Explanation: It is possible that "internationalization" was the original string. - "internationalization" -> Split: ["internationalization"] -> Do not replace any element -> Concatenate: "internationalization", which is s1. - "internationalization" -> Split: ["i", "nternationalizatio", "n"] -> Replace: ["i", "18", "n"] -> Concatenate: "i18n", which is s2
Example 2:
Input: s1 = "l123e", s2 = "44" Output: true Explanation: It is possible that "leetcode" was the original string. - "leetcode" -> Split: ["l", "e", "et", "cod", "e"] -> Replace: ["l", "1", "2", "3", "e"] -> Concatenate: "l123e", which is s1. - "leetcode" -> Split: ["leet", "code"] -> Replace: ["4", "4"] -> Concatenate: "44", which is s2.
Example 3:
Input: s1 = "a5b", s2 = "c5b" Output: false Explanation: It is impossible. - The original string encoded as s1 must start with the letter 'a'. - The original string encoded as s2 must start with the letter 'c'.
Constraints:
1 <= s1.length, s2.length <= 40s1 and s2 consist of digits 1-9 (inclusive), and lowercase English letters only.s1 and s2 does not exceed 3.When you get asked this question in a real-life environment, it will often be ambiguous (especially at FAANG). Make sure to ask these questions in that case:
The brute force approach is like trying to decode a secret message by trying every possible combination of letters. We painstakingly check if any possible original string can produce both encoded strings we were given.
Here's how the algorithm would work step-by-step:
def check_original_string_exists_brute_force(
encoded_string_one,
encoded_string_two
):
maximum_original_string_length = 5
for original_string_length in range(
1, maximum_original_string_length + 1
):
for i in range(26 ** original_string_length):
original_string = ""
temp_i = i
for _ in range(original_string_length):
original_string = (
chr(ord('a') + temp_i % 26) + original_string
)
temp_i //= 26
encoded_string_one_candidate = encode_string(
original_string, 1
)
# If the first encoded string matches, proceed to check the second.
if (
encoded_string_one_candidate
== encoded_string_one
):
encoded_string_two_candidate = encode_string(
original_string, 2
)
# If both encoded strings match, we found an original string.
if (
encoded_string_two_candidate
== encoded_string_two
):
return True
# No matching original string was found within the specified length.
return False
def encode_string(original_string, encoding_type):
encoded_string = ""
for char in original_string:
if encoding_type == 1:
encoded_string += str(ord(char))
else:
encoded_string += char.upper()
return encoded_stringThe problem involves checking if a potential original string matches two compressed versions of it. We use a process like reverse engineering, attempting to build the original string using the encoded strings as blueprints while checking for inconsistencies to determine if a match is possible.
Here's how the algorithm would work step-by-step:
def check_if_original_string_exists(
first_encoded_string, second_encoded_string
):
first_string_length = len(first_encoded_string)
second_string_length = len(second_encoded_string)
# Use dynamic programming for memoization
memo = {}
def can_form_original_string(
first_string_index, second_string_index, current_string
):
if (
first_string_index, second_string_index
) in memo:
return memo[(first_string_index, second_string_index)]
if (
first_string_index == first_string_length
and second_string_index == second_string_length
):
memo[(first_string_index, second_string_index)] = True
return True
if (
first_string_index == first_string_length
or second_string_index == second_string_length
):
memo[(first_string_index, second_string_index)] = False
return False
# Try decoding from the first encoded string.
if first_encoded_string[first_string_index].isdigit():
number_end_index = first_string_index
while (
number_end_index < first_string_length
and first_encoded_string[number_end_index].isdigit()
):
number_end_index += 1
repeat_count = int(
first_encoded_string[
first_string_index:number_end_index
]
)
# Explore the possibility of using repeat count.
if second_encoded_string[second_string_index].isdigit():
number_end_index_2 = second_string_index
while (
number_end_index_2 < second_string_length
and second_encoded_string[number_end_index_2].isdigit()
):
number_end_index_2 += 1
repeat_count_2 = int(
second_encoded_string[
second_string_index:number_end_index_2
]
)
# If both are digits, proceed with both repeat counts
if repeat_count == repeat_count_2:
memo[(first_string_index, second_string_index)] = can_form_original_string(
number_end_index, number_end_index_2, current_string
)
return memo[(first_string_index, second_string_index)]
else:
memo[(first_string_index, second_string_index)] = False
return False
else:
if (
second_string_index + repeat_count
<= second_string_length
):
substring = second_encoded_string[
second_string_index : second_string_index + repeat_count
]
# Check if substring is all the same character
if len(set(substring)) == 1:
memo[(first_string_index, second_string_index)] = can_form_original_string(
number_end_index,
second_string_index + repeat_count,
current_string,
)
return memo[(first_string_index, second_string_index)]
else:
memo[(first_string_index, second_string_index)] = False
return False
else:
memo[(first_string_index, second_string_index)] = False
return False
else:
# If the first encoded string has a character
if second_encoded_string[second_string_index].isdigit():
number_end_index_2 = second_string_index
while (
number_end_index_2 < second_string_length
and second_encoded_string[number_end_index_2].isdigit()
):
number_end_index_2 += 1
repeat_count_2 = int(
second_encoded_string[
second_string_index:number_end_index_2
]
)
# Verify against a potentially repeating second string
if (
first_string_index + repeat_count_2
<= first_string_length
):
substring = first_encoded_string[
first_string_index : first_string_index + repeat_count_2
]
if len(set(substring)) == 1:
memo[(first_string_index, second_string_index)] = can_form_original_string(
first_string_index + repeat_count_2,
number_end_index_2,
current_string,
)
return memo[(first_string_index, second_string_index)]
else:
memo[(first_string_index, second_string_index)] = False
return False
else:
memo[(first_string_index, second_string_index)] = False
return False
else:
# When both are letters, they must match
if (
first_encoded_string[first_string_index]
== second_encoded_string[second_string_index]
):
# Check for identical characters
memo[(first_string_index, second_string_index)] = can_form_original_string(
first_string_index + 1,
second_string_index + 1,
current_string
+ first_encoded_string[first_string_index],
)
return memo[(first_string_index, second_string_index)]
else:
memo[(first_string_index, second_string_index)] = False
return False
# Begin the recursive checking process
return can_form_original_string(0, 0, "")| Case | How to Handle |
|---|---|
| Both encoded strings are empty | Return true; an empty original string matches two empty encodings. |
| One encoded string is empty, the other is not | Return false; a non-empty encoding cannot result from an empty original. |
| Encoded strings have leading zeros in their numerical parts (e.g., '02a') | Treat encoded strings with leading zeros as invalid encodings, return false. |
| The numerical part of an encoded string is larger than the length of the original string it represents. | The number must represent repetition count and be checked against the original string length, return false when larger. |
| Encoded strings are very long, potentially leading to stack overflow with recursion. | Use dynamic programming (memoization) to avoid redundant calculations and potential stack overflow with deep recursion. |
| The problem statement lacks clear constraints on input string length. | Assume reasonable constraints (e.g., up to 200 characters), and clarify in interview if needed to consider space and time complexity. |
| An encoded string contains consecutive numbers followed by letters without being completely decoded. | Ensure that the decoded string can be fully consumed by both encoded strings using backtracking. |
| An original string can have multiple possible encodings in each format but they do not match each other. | Backtrack to explore different valid ways to encode the string using either of the encodings. |