You are given a 0-indexed 2D integer array tires where tires[i] = [fi, ri] indicates that the ith tire can finish its xth successive lap in fi * ri(x-1) seconds.
fi = 3 and ri = 2, then the tire would finish its 1st lap in 3 seconds, its 2nd lap in 3 * 2 = 6 seconds, its 3rd lap in 3 * 22 = 12 seconds, etc.You are also given an integer changeTime and an integer numLaps.
The race consists of numLaps laps and you may start the race with any tire. You have an unlimited supply of each tire and after every lap, you may change to any given tire (including the current tire type) if you wait changeTime seconds.
Return the minimum time to finish the race.
Example 1:
Input: tires = [[2,3],[3,4]], changeTime = 5, numLaps = 4 Output: 21 Explanation: Lap 1: Start with tire 0 and finish the lap in 2 seconds. Lap 2: Continue with tire 0 and finish the lap in 2 * 3 = 6 seconds. Lap 3: Change tires to a new tire 0 for 5 seconds and then finish the lap in another 2 seconds. Lap 4: Continue with tire 0 and finish the lap in 2 * 3 = 6 seconds. Total time = 2 + 6 + 5 + 2 + 6 = 21 seconds. The minimum time to complete the race is 21 seconds.
Example 2:
Input: tires = [[1,10],[2,2],[3,4]], changeTime = 6, numLaps = 5 Output: 25 Explanation: Lap 1: Start with tire 1 and finish the lap in 2 seconds. Lap 2: Continue with tire 1 and finish the lap in 2 * 2 = 4 seconds. Lap 3: Change tires to a new tire 1 for 6 seconds and then finish the lap in another 2 seconds. Lap 4: Continue with tire 1 and finish the lap in 2 * 2 = 4 seconds. Lap 5: Change tires to tire 0 for 6 seconds then finish the lap in another 1 second. Total time = 2 + 4 + 6 + 2 + 4 + 6 + 1 = 25 seconds. The minimum time to complete the race is 25 seconds.
Constraints:
1 <= tires.length <= 105tires[i].length == 21 <= fi, changeTime <= 1052 <= ri <= 1051 <= numLaps <= 1000When you get asked this question in a real-life environment, it will often be ambiguous (especially at FAANG). Make sure to ask these questions in that case:
The brute force approach to finding the minimum time to finish the race involves exploring every possible combination of tire changes and lap counts for each tire. We calculate the total time for each combination and then find the minimum among all the times. This guarantees finding the optimal solution, but it might take a very long time.
Here's how the algorithm would work step-by-step:
def minimum_time_to_finish_race_brute_force(tire_parameters, change_time, laps):
minimum_total_time = float('inf')
# Iterate through all possible number of tires used
for number_of_tires in range(1, laps + 1):
possible_lap_combinations = get_lap_combinations(laps, number_of_tires)
# Iterate through each possible combination of lap counts for the tires.
for lap_combination in possible_lap_combinations:
total_time_for_combination = 0
# Calculate the total time for using this specific combination of tires.
for tire_index, laps_for_tire in enumerate(lap_combination):
tire_specification = tire_parameters[tire_index % len(tire_parameters)]
first_lap_time = tire_specification[0]
degradation_factor = tire_specification[1]
tire_wear_time = 0
# Calculate tire wear time
for lap_number in range(laps_for_tire):
tire_wear_time += first_lap_time * (degradation_factor ** lap_number)
total_time_for_combination += tire_wear_time
# Add the time spent changing tires, except for the last tire
if tire_index < len(lap_combination) - 1:
total_time_for_combination += change_time
# Update overall min time, if appropriate
minimum_total_time = min(minimum_total_time, total_time_for_combination)
return minimum_total_time
def get_lap_combinations(total_laps, number_of_tires):
if number_of_tires == 1:
return [[total_laps]]
combinations = []
for first_tire_laps in range(1, total_laps - number_of_tires + 2):
remaining_laps = total_laps - first_tire_laps
remaining_tires = number_of_tires - 1
# Recursively create lap count combinations.
sub_combinations = get_lap_combinations(remaining_laps, remaining_tires)
for sub_combination in sub_combinations:
combinations.append([first_tire_laps] + sub_combination)
return combinationsTo find the fastest time, we need to figure out the best way to use a standard tire or switch to special tires for each lap. The key is to use fastest tires for laps where they are most effective while not overusing them.
Here's how the algorithm would work step-by-step:
def minimum_time_to_finish_race(
number_of_laps,
standard_tire_time,
special_tire_time,
change_tires_time
):
fastest_lap_times = [
standard_tire_time * lap for lap in range(1, number_of_laps + 1)
]
# Calculate the fastest time for each lap, using special tires if faster
for lap in range(1, number_of_laps + 1):
fastest_lap_times[lap - 1] = min(
fastest_lap_times[lap - 1],
special_tire_time[0] + special_tire_time[1] * (lap - 1),
)
# Calculate the prefix minimums of fastest_lap_times
for lap in range(1, number_of_laps):
fastest_lap_times[lap] = min(
fastest_lap_times[lap], fastest_lap_times[lap - 1]
)
minimum_race_time = float('inf')
special_tire_laps = min(number_of_laps, len(special_tire_time) // 2)
# Iterate to find min time using special and standard tires
for laps_with_special_tires in range(special_tire_laps + 1):
# Add time to switch to new tires before continuing
current_race_time = change_tires_time
# Use special tires for some laps.
if laps_with_special_tires > 0:
current_race_time += fastest_lap_times[
laps_with_special_tires - 1
]
# Use standard tires for the rest of the laps.
current_race_time += (
number_of_laps - laps_with_special_tires
) * standard_tire_time
minimum_race_time = min(minimum_race_time, current_race_time)
# If there is only one tire set, don't factor in the change tire time
if special_tire_laps == number_of_laps:
minimum_race_time -= change_tires_time
all_standard_tires_time = number_of_laps * standard_tire_time + change_tires_time
return min(minimum_race_time, all_standard_tires_time)| Case | How to Handle |
|---|---|
| Empty passes array | Return 0, as no passes mean no time spent racing. |
| Empty tires array or tires array with inconsistent lengths | If tires is empty or its sub-arrays are of different lengths, return appropriate error or default maximum value like infinity. |
| passes or changeTime is negative | If either passes or changeTime is negative, throw an IllegalArgumentException or return -1 to indicate invalid input. |
| Single Pass Required | Calculate the minimum time required for one pass with each tire and return the minimal value. |
| Integer Overflow with time calculation | Use long data type for intermediate time calculations to prevent potential integer overflow issues. |
| changeTime is very large | A very large changeTime might dominate the total time; handle this efficiently by only considering relevant tires/pass combinations with DP. |
| Zero values in f or r arrays within tires | Handle zero values in f or r arrays by returning infinity, since no progress will be made. |
| Maximum passes exceeding computational limits | Optimize DP table size by only storing the necessary number of passes based on cost effectiveness analysis of different tires. |