Taro Logo

Poor Pigs

#1504 Most AskedHard
15 views
Topics:
Bit Manipulation

There are buckets buckets of liquid, where exactly one of the buckets is poisonous. To figure out which one is poisonous, you feed some number of (poor) pigs the liquid to see whether they will die or not. Unfortunately, you only have minutesToTest minutes to determine which bucket is poisonous.

You can feed the pigs according to these steps:

  1. Choose some live pigs to feed.
  2. For each pig, choose which buckets to feed it. The pig will consume all the chosen buckets simultaneously and will take no time. Each pig can feed from any number of buckets, and each bucket can be fed from by any number of pigs.
  3. Wait for minutesToDie minutes. You may not feed any other pigs during this time.
  4. After minutesToDie minutes have passed, any pigs that have been fed the poisonous bucket will die, and all others will survive.
  5. Repeat this process until you run out of time.

Given buckets, minutesToDie, and minutesToTest, return the minimum number of pigs needed to figure out which bucket is poisonous within the allotted time.

Example 1:

Input: buckets = 4, minutesToDie = 15, minutesToTest = 15
Output: 2
Explanation: We can determine the poisonous bucket as follows:
At time 0, feed the first pig buckets 1 and 2, and feed the second pig buckets 2 and 3.
At time 15, there are 4 possible outcomes:
- If only the first pig dies, then bucket 1 must be poisonous.
- If only the second pig dies, then bucket 3 must be poisonous.
- If both pigs die, then bucket 2 must be poisonous.
- If neither pig dies, then bucket 4 must be poisonous.

Example 2:

Input: buckets = 4, minutesToDie = 15, minutesToTest = 30
Output: 2
Explanation: We can determine the poisonous bucket as follows:
At time 0, feed the first pig bucket 1, and feed the second pig bucket 2.
At time 15, there are 2 possible outcomes:
- If either pig dies, then the poisonous bucket is the one it was fed.
- If neither pig dies, then feed the first pig bucket 3, and feed the second pig bucket 4.
At time 30, one of the two pigs must die, and the poisonous bucket is the one it was fed.

Constraints:

  • 1 <= buckets <= 1000
  • 1 <= minutesToDie <= minutesToTest <= 100

Solution


Clarifying Questions

When you get asked this question in a real-life environment, it will often be ambiguous (especially at FAANG). Make sure to ask these questions in that case:

  1. What are the constraints on `buckets`, `minutesToDie`, and `minutesToTest`? Can they be zero? Can they be very large?
  2. If it's impossible to determine the poisoned bucket within `minutesToTest`, what should I return?
  3. Are `minutesToDie` and `minutesToTest` always positive integers, and is `minutesToDie` always less than or equal to `minutesToTest`?
  4. Can I assume the number of pigs available is sufficient to find the poisoned bucket, or could there be cases where no solution is possible with the given number of pigs?
  5. Is there any limit to the number of pigs available?

Brute Force Solution

Approach

The brute force approach for the 'Poor Pigs' puzzle involves systematically trying all possible pig assignments to buckets. We simulate every combination of pigs drinking from buckets to identify the poisoned one. This guarantees finding the solution, albeit inefficiently.

Here's how the algorithm would work step-by-step:

  1. Imagine each pig tries drinking from every possible combination of buckets.
  2. For each possible combination of buckets, we check if the pigs' outcomes could uniquely identify the poisoned bucket.
  3. If a set of pig/bucket assignments works, then we have a potential solution.
  4. We continue to check different arrangements until we find the best one or have exhausted all possibilities.
  5. The best one is the solution with the fewest pigs.

Code Implementation

def poor_pigs_brute_force(buckets, minutes_to_die, minutes_to_test):
    max_tests = minutes_to_test // minutes_to_die

    # Iterate through all possible numbers of pigs
    for num_pigs in range(buckets + 1):
        if is_solution(buckets, max_tests, num_pigs):
            return num_pigs

    return -1

def is_solution(buckets, max_tests, num_pigs):

    # Use a helper function to simulate pig drinking scenarios
    if simulate_drinking(buckets, max_tests, num_pigs):
        return True
    return False

def simulate_drinking(buckets, max_tests, num_pigs):

    # Check if num_pigs can uniquely identify poisoned bucket
    if (max_tests + 1) ** num_pigs >= buckets:
        return True
    return False

Big(O) Analysis

Time Complexity
O(b^p) – The brute force approach explores all possible assignments of pigs to buckets. We are essentially trying all combinations of which buckets each pig drinks from, where 'b' is the number of buckets and 'p' is the number of pigs. The algorithm's runtime is driven by iterating through all possible combinations of pig-bucket assignments. Therefore, if we have b buckets and p pigs, there are approximately b^p possible combinations to test in the worst case, making the time complexity O(b^p).
Space Complexity
O(1) – The described brute force approach primarily involves simulating pig and bucket assignments and checking if outcomes uniquely identify the poisoned bucket. This process doesn't inherently require storing a large amount of data proportional to the number of buckets (N). We are mainly dealing with individual combinations and comparisons, which can be done with a few integer variables to track pig/bucket assignments, and boolean variables to store whether a solution is found. The auxiliary space used remains constant, independent of N. Therefore, the space complexity is O(1).

Optimal Solution

Approach

The key insight is to realize that each pig can represent multiple tests simultaneously. We're not just finding the poisoned bucket; we're encoding information about which buckets are safe or not safe using the pigs as binary digits.

Here's how the algorithm would work step-by-step:

  1. Figure out how many different possibilities each pig can test. Think about it like this: a pig can die after drinking from a bucket, meaning that bucket is poisoned. But a pig can also *not* die, which gives you valuable information too.
  2. Determine the total number of states a pig can have. A pig can be alive at the end of the test, or die after trying bucket 1, or die after trying bucket 2, and so on. If a pig can drink in 'rounds', it can die in any of those rounds or survive all of them.
  3. Calculate how many combinations of bucket-states we need to distinguish. We need to figure out the single poisoned bucket out of all the possible buckets.
  4. Find the smallest number of pigs to test all the buckets. You need to find the number of pigs such that when you raise the number of states each pig can be in to the power of the number of pigs, that is larger than or equal to the number of buckets.

Code Implementation

import math

def poor_pigs(number_of_buckets, minutes_to_die, minutes_to_test):
    time_to_drink = minutes_to_test / minutes_to_die

    # Determine the number of states each pig can have
    number_of_states = int(time_to_drink) + 1

    # If there is only 1 bucket, no pigs are needed
    if number_of_buckets == 1:
        return 0

    # Calculate the number of pigs needed to identify the poisoned bucket.
    number_of_pigs = math.ceil(math.log(number_of_buckets, number_of_states))

    return int(number_of_pigs)

Big(O) Analysis

Time Complexity
O(log(buckets, (minutesToTest / minutesToDie + 1))) – The algorithm primarily involves calculating the logarithm of the number of buckets to the base of (minutesToTest / minutesToDie + 1). The number of buckets is the main input size. The core computation calculates how many pigs (or 'trials') are needed. The logarithmic operation's cost depends on the magnitude of 'buckets'; as the number of buckets increases, the cost rises logarithmically. Therefore, the time complexity is directly proportional to the logarithm with base (minutesToTest / minutesToDie + 1) of the number of buckets.
Space Complexity
O(1) – The described approach primarily involves calculations to determine the number of pigs required and does not rely on auxiliary data structures that scale with the number of buckets or any other input parameter. The steps involve finding the number of states each pig can have, calculating the combinations of bucket-states, and finding the smallest number of pigs to test all the buckets using mathematical operations. Therefore, no significant extra memory is allocated beyond a few constant-sized variables for intermediate calculations, resulting in constant space complexity.

Edge Cases

Zero buckets (times = 0) and > 0 pigs and > 0 total buckets
How to Handle:
Return 0 immediately since no buckets can be tested.
Only one bucket and any amount of pigs and trials
How to Handle:
Return 1 since only one pig is needed to test the only bucket.
Minutes to test is zero but there's > 1 buckets and > 0 pigs
How to Handle:
Return the total number of buckets, since it's impossible to find the poisoned one.
Minutes to test is zero, buckets is one, and pigs is one
How to Handle:
Return 1 bucket since there is a single bucket to test.
Integer overflow when calculating states (buckets, pigs, trials relation)
How to Handle:
Use long type for intermediate calculations to avoid integer overflow during power calculations.
Large number of buckets causing inefficient logarithmic calculations
How to Handle:
Optimize calculations by pre-computing lookup tables or by performing iterative calculations when applicable.
Edge case where zero pigs are available with more than one bucket
How to Handle:
Return the total number of buckets, because with zero pigs, it is impossible to pinpoint a poisonous bucket.
Number of buckets is very large
How to Handle:
Algorithm should be able to handle a very large number of buckets using a logarithmic approach without overflowing.
0/1916 completed