Taro Logo

Prison Cells After N Days

Medium
Asked by:
Profile picture
33 views
Topics:
Arrays

There are 8 prison cells in a row and each cell is either occupied or vacant.

Each day, whether the cell is occupied or vacant changes according to the following rules:

  • If a cell has two adjacent neighbors that are both occupied or both vacant, then the cell becomes occupied.
  • Otherwise, it becomes vacant.

Note that because the prison is a row, the first and the last cells in the row can't have two adjacent neighbors.

You are given an integer array cells where cells[i] == 1 if the ith cell is occupied and cells[i] == 0 if the ith cell is vacant, and you are given an integer n.

Return the state of the prison after n days (i.e., n such changes described above).

Example 1:

Input: cells = [0,1,0,1,1,0,0,1], n = 7
Output: [0,0,1,1,0,0,0,0]
Explanation: The following table summarizes the state of the prison on each day:
Day 0: [0, 1, 0, 1, 1, 0, 0, 1]
Day 1: [0, 1, 1, 0, 0, 0, 0, 0]
Day 2: [0, 0, 0, 0, 1, 1, 1, 0]
Day 3: [0, 1, 1, 0, 0, 1, 0, 0]
Day 4: [0, 0, 0, 0, 0, 1, 0, 0]
Day 5: [0, 1, 1, 1, 0, 1, 0, 0]
Day 6: [0, 0, 1, 0, 1, 1, 0, 0]
Day 7: [0, 0, 1, 1, 0, 0, 0, 0]

Example 2:

Input: cells = [1,0,0,1,0,0,1,0], n = 1000000000
Output: [0,0,1,1,1,1,1,0]

Constraints:

  • cells.length == 8
  • cells[i] is either 0 or 1.
  • 1 <= n <= 109

Solution


Clarifying Questions

When you get asked this question in a real-life environment, it will often be ambiguous (especially at FAANG). Make sure to ask these questions in that case:

  1. What is the range of values for 'N' (number of days)? Could it be zero or negative?
  2. What is the size of the 'cells' array? Is it always of a specific length?
  3. Are the cell values guaranteed to be only 0 or 1?
  4. Should I modify the input array 'cells' in-place, or return a new array representing the state of the cells after N days?
  5. If N is very large, can I assume there will be a repeating pattern in the cell states, and optimize based on that assumption?

Brute Force Solution

Approach

The brute force approach is like simulating the prison cell changes day by day for the entire specified number of days. We simply repeat the rules of cell occupancy update for each day, until we've simulated all the days.

Here's how the algorithm would work step-by-step:

  1. Start with the initial state of the prison cells.
  2. Simulate the first day: For each cell, look at its neighbors. If both neighbors are occupied or both are empty, the cell becomes occupied. Otherwise, it becomes empty.
  3. Simulate the second day: Apply the same neighbor rule again, based on the updated cell states from the previous day.
  4. Continue simulating each subsequent day, using the cell states from the previous day to determine the current day's cell states.
  5. Repeat the simulation process until you've simulated all the requested days.
  6. The final state of the cells after all the simulations is the answer.

Code Implementation

def prison_after_n_days_brute_force(cells, number_of_days):
    for day in range(number_of_days):
        # Create a copy to store the next day's cell states.
        next_day_cells = cells[:]

        for cell_index in range(len(cells)):
            # Determine the neighbors of the current cell.
            if cell_index == 0:
                left_neighbor = 0
            else:
                left_neighbor = cells[cell_index - 1]

            if cell_index == len(cells) - 1:
                right_neighbor = 0
            else:
                right_neighbor = cells[cell_index + 1]

            # Apply the rules based on neighboring cells.
            if left_neighbor == right_neighbor:
                next_day_cells[cell_index] = 1
            else:
                next_day_cells[cell_index] = 0

        # Update cells for the next iteration. This copies
        # the next day's state to the 'cells' variable.
        cells = next_day_cells

    return cells

Big(O) Analysis

Time Complexity
O(N) – The algorithm simulates the prison cell changes for N days. In each of the N days, it iterates through all the cells to update their states based on the states of their neighbors from the previous day. Since there are a fixed number of cells (let's call it C, which is 8 in this specific problem context but is constant), updating the cells for a single day takes O(C) time, where C is a constant. Therefore, the entire simulation for N days takes N * O(C) time, which simplifies to O(N) since C is a constant.
Space Complexity
O(1) – The brute force approach simulates the prison cell changes day by day. The primary operation involves updating the state of each cell based on its neighbors, likely using a temporary array or variable to store the next day's cell states before updating the original array. However, since the number of cells is fixed (in this problem it is 8) regardless of the input 'N' (number of days), the space required for the temporary storage is constant. Therefore, the auxiliary space is independent of N and is O(1).

Optimal Solution

Approach

The key insight is that the prison cell states repeat after a certain number of days, due to the limited number of possible configurations. Instead of simulating every day, we can look for a cycle and use that to efficiently determine the state after a very large number of days.

Here's how the algorithm would work step-by-step:

  1. Simulate the cell states day by day, keeping track of the pattern we see.
  2. As you simulate each day, check if the current cell state has already been seen before.
  3. If you encounter a state you've already seen, you've found a cycle!
  4. Determine the length of the cycle and how many days it took to reach the start of the cycle.
  5. Calculate how many remaining days are left after accounting for the days before the cycle and the whole cycles.
  6. Simulate the remaining days (which will be less than the cycle length) from the start of the cycle to find the final cell state.

Code Implementation

def prison_after_n_days(cells, number_of_days):
    seen_states = {}
    current_cells = cells[:]
    for day in range(number_of_days):
        # Check if we've seen this state before to find cycle.
        cells_tuple = tuple(current_cells)
        if cells_tuple in seen_states:
            cycle_length = day - seen_states[cells_tuple]
            remaining_days = (number_of_days - day) % cycle_length

            # Fast forward to the equivalent day within the cycle.
            for _ in range(remaining_days):
                next_day_cells = [0] * len(current_cells)
                for i in range(1, len(current_cells) - 1):
                    next_day_cells[i] = 1 if current_cells[i-1] == current_cells[i+1] else 0
                current_cells = next_day_cells[:]
            return current_cells

        seen_states[cells_tuple] = day
        next_day_cells = [0] * len(current_cells)

        # Simulate the next day's cell states.
        for i in range(1, len(current_cells) - 1):
            next_day_cells[i] = 1 if current_cells[i-1] == current_cells[i+1] else 0
        current_cells = next_day_cells[:]

    return current_cells

Big(O) Analysis

Time Complexity
O(1) – The problem's constraint specifies that the prison has 8 cells. The algorithm iterates until it finds a repeating state. Because the number of cells is fixed, the maximum number of possible states is 2^8 = 256. Therefore, the outer loop, which simulates days, will execute at most 256 times. The inner loop, which calculates the next state from the current one, iterates a maximum of 8 times (the number of cells). Both the maximum days and cell numbers are constant, so the time complexity is O(1).
Space Complexity
O(1) – The space complexity is determined by the auxiliary data structures used to track the cell states and detect cycles. The algorithm stores cell states in a data structure like a hash map or list to check for previously seen configurations. The problem states that there are 8 cells, so the number of possible configurations is bounded by 2^8 = 256. Thus, the space required to store these states is constant, independent of the input N (number of days). Therefore, the space complexity is O(1).

Edge Cases

Null or empty input array cells
How to Handle:
Return the input array as is, or throw an IllegalArgumentException depending on requirements.
N is zero
How to Handle:
Return the original cells array as no days have passed.
Cells array contains all zeros
How to Handle:
The next day will also be all zeros, so the solution must handle that appropriately.
Cells array contains all ones
How to Handle:
The next day will be all zeros except for the boundary conditions, so the solution must handle this transition.
Large value of N causing many iterations
How to Handle:
Use a memoization technique (detect cycles) to avoid redundant calculations and optimize for large N.
Cells array has only two cells
How to Handle:
The problem states cells.length == 8, return error or throw exception if this is not the case.
N is a very large number, causing potential integer overflow if not handled correctly during calculation of index
How to Handle:
Modulo operation with the cycle length will help in avoiding the overflow when indexing through memoization.
Cells array has extreme boundary conditions (e.g., all cells are 0 except the first and last)
How to Handle:
The simulation correctly propagates changes based on neighboring cells regardless of boundary conditions.